IMO meteorological and hydroglogical data. Specified in SN/Circ.236 Annex 2.
Note:All unavailable values are defined to be the highest possible number in the next following
Name | NumberOfBits | ArrayLength | Type | Units | Description |
---|---|---|---|---|---|
MessageID | 6 | uint | AIS message number. Must be 8 | ||
RepeatIndicator | 2 | uint | Indicated how many times a message has been repeated 0: default 3: do not repeat any more |
||
UserID | 30 | uint | Unique ship identification number (MMSI) | ||
Spare | 2 | uint | Reserved for definition by a regional authority. | ||
dac | 10 | uint | Designated Area Code | ||
fid | 4 | uint | Functional Identifier | ||
Position_longitude | 25 | decimal | degrees | Location of the vessel East West location | |
Position_latitude | 24 | decimal | degrees | Location of the vessel North South location | |
datetime | 16 | uint | hhmmss. Should be 5 bits for hour, 6 bits min, 6 bits sec? | ||
avewind | 7 | uint | knots | Average wind speed values for the last 10 minutes. FIX: why is 121-126 not valid??? | |
windgust | 7 | uint | knots | Wind gust is the max wind speed value reading during the last 10 minutes. FIX: why is 121-126 not valid??? | |
winddir | 9 | uint | degrees | Wind direction. No idea if this is the latest, ave, median, etc. FIX: find out! | |
windgustdir | 9 | uint | degrees | Wind direction for the gust. | |
airtemp | 11 | decimal | degrees Celsius | Bry bulb temperature | |
relhumid | 7 | uint | percent | Relative humidity | |
dewpoint | 10 | decimal | degrees Celsius | Bry bulb temperature - FIX: should this be a udecimal?? | |
airpressure | 9 | udecimal | hPa | Air pressure | |
airpressuretrend | 2 | uint | Air pressure trend 0: steady 1: decreasing 2: increasing 3: unavailable |
||
horizvis | 8 | udecimal | nm | Horizontal visibility | |
waterlevel | 9 | udecimal | m | Water level (incl. tide) | |
waterleveltrend | 2 | uint | Water level trend 0: steady 1: decreasing 2: increasing 3: unavailable |
||
surfcurspeed | 8 | udecimal | knots | Surace current speed | |
surfcurdir | 9 | uint | degrees | Surface current direction | |
curspeed2 | 8 | udecimal | knots | Level 2 current speed | |
curdir2 | 9 | uint | degrees | Level 2 current direction | |
curlevel2 | 5 | uint | m | Measuring level below sea surface for level 2 | |
curspeed3 | 8 | udecimal | knots | Level 3 current speed | |
curdir3 | 9 | uint | degrees | Level 3 current direction | |
curlevel3 | 5 | uint | m | Measuring level below sea surface for level 3 | |
sigwaveheight | 8 | udecimal | m | Significan wave height | |
waveperiod | 8 | uint | sec | Wave period - FIX: How does to fit to the power spectrum? | |
wavedir | 9 | uint | degrees | Wave direction - FIX: please define this better | |
swellheight | 8 | udecimal | m | Swell height | |
swellperiod | 8 | uint | sec | Swell period - FIX: How does to fit to the power spectrum? | |
swelldir | 9 | uint | degrees | Swell direction - FIX: please define this better | |
seastate | 4 | uint | Beaufort scale | Sea state according to the Beaufort scale 0: Calm 1: Light air 2: Light breeze 3: Gentle breeze 4: Moderate breeze 5: Fresh breeze 6: Strong breeze 7: Near gale 8: Gale 9: Strong gale 10: Storm 11: Violent storm 12: Hurricane 15: unavailable |
|
watertemp | 10 | decimal | degrees Celsius | Water temp (FIX: at surface? Any requirements on how measured?) | |
preciptype | 3 | uint | WMO scale index | According to WMO 0: FIX: find the WMO list of types 7: unavailable |
|
salinity | 9 | decimal | 0/00 | Salinity - FIX: by what standard? Measured how? | |
ice | 1 | bool | Yes or no for the presence of ice. FIX: what types of ice constitute a yes?? | ||
Spare | 6 | uint | Must be zero. FIX: this does not seem slot aligned. |